Liczymy pasujące modele…
Printing Time-Lapse Video ^^ Link here You can find more keychains in this collection Ready print Profiles for Bambu Printers on MakerWorld, link Below:…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Art made in cooperation with _.xenort._ (profile on TikTok) Printing and Drawing Time-Lapse Video ^^ https://www.tiktok.com/@_.xenort._/video/7531859369512799510 You can find more keychains in this collection --- Commercial Use --- By…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
A new 3D figurine generated by AI, a Chibi Goldorak. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
There are many much cheaper options out there , this fulfills my personal LARP needs. At it's core, this is basically a greebled rectangle. Fits in most pouches that can hold a MPU5, Streamcaster, AN/PRC152, etc. Has survived a couple of…
I use a 4mm guidepin between the V-die adapter and lower dimple die to keep them centered. You dont need it really, you could change the geometry of the print to achieve the same thing. Video using them here:
Da es diese Schilder mit dem km Zusatz nicht mehr gibt habe ich dieses selber gedruckt. Ich habe es mit Filamentwechsel gedruckt, man kann aber auch weiß drucken und die Schrift dann schwarz machen. Print Settings Printer Brand: Anycubic…
Quick and simple mount for RAK19007 base board with ethernet add-on module. Didn't see anything out there to help support the ethernet card when installing into an enclosure. It's not super pretty but gets the job done. This is not set up…
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10% Category: Sport & Outdoors
This is my take on a minimalistic portable mesh node for the RAK19003. Prints with no supports! Battery life is well over a week. Bluetooth companion went from from 90% to 75% in 7 days with several flood adverts and 1-3 messages sent…
another flash hider, fits on 14mm thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% Category: Sport & Outdoors
The small German tank leichttraktor, literally translating to ‘light tractor.’ This was an experimental tank developed in 1920. It was kept secret, but eventually it wasn't really used in combat. Only 4 were produced, and those were…
Threaded flash hider, fits on 14mm ccw thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,1 Infill: 40% Category: Sport & Outdoors
Load Cell Handbrake A load cell based handbrake design that's compatible with all of my other DIY Sim Racing projects. Project Video Link There are two different versions of the handbrake design, "Printed" and "Laser cut". The laser cut…
just a airsoft muzzle breaker, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
This model is a replacement for the reverse/brake side of the trigger on the FlySky Noble NB4/NB4+ radio. I accidentally broke the Medium size, and then the Small size broke on me unexpectedly. There is definitely a weak spot in the…
Replacement stock style Parking Brake Release for Honda S2000. (E-Brake Button) May fit other hondas. Recommend tapping with M5x.8 Print Settings Printer Brand: LulzBot Printer: Mini Rafts: No Supports: No Resolution: .2 Infill: 12%…
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
I designed this for deploying Meshcore repeaters in a tidy, quick and repeatable manner. This mount is for attaching a RAK19003 PCB to the grid plate you can find on my profile. The PCB is secured using the M2.5 bolts which come supplied…
Threaded flash hider, fits on 14mm ccw thread. You can find the grip ( https://www.thingiverse.com/thing:2000846 ) and the picatinny rails ( https://www.thingiverse.com/thing:2053074 & https://www.thingiverse.com/thing:2053075 ) in my…
Place on the extruder plate and secure with the tightening strap.
The other handbrake button broke so I recreated it and added the Morris Minor logo to it. Printed at 100% infill
Threaded flash hider, fits on 14mm ccw thread. Check out my other designs, too :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 40% Category: Sport & Outdoors
another flash hider, fits on 14mm thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% Category: Sport & Outdoors
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
This is a LabStack module for a RAK19007 LoRa board with 1.3" OLED display for Meshtastic, Meshcore, or Reticulum RNode. It is designed to mount in a 2U LabStack Mini bracket. The board mounts on the backside with the screws included in…
E3D Revo Micro mount for Ultimaker Original - Return Of The Kraken Hardware required: 1. Up to 4x Revo Micro hotends (more than 2x will require board upgrade or additional MCU like RAMPS if using Klipper firmware) 2. Same ammount of…
After getting a sequential shifter, it felt like the base handbrake handle wasn't long enough even after moving it up far as possible with the wood sections it came with. You only need two holes with screws in it to lock it down, so as…
Held on a playseat challenge thanks to this design: https://www.printables.com/model/302265-playseat-challenge-shifter-holder-shortened-attach The controller board and wires…
Spacers to remove the sideways wobble from cheap sim handbrake. Recommended to drill & tap (or just drill if you have long 4mm screws) holes to mount these. Most likely wont bring the needed rigidness otherwise. I used 12x4mm screws that…
Ganz CSMG tram speed/brake controller
My truck has an OEM trailer brake controller, but occasionally someone needs to borrow the trailer who doesn't have a brake controller. I keep this mounted inside the trailer, just in case. You will need a cheap bungee cord from Amazon,…
This is to set on display for all to see.
Hey there, thanks for checking out my model. I'm still trying to get better at CAD, but recently I needed a grip for a hand brake, and I thought I would make one instead of just downloading one, so I made this guy a hexgrip handle for…
DARAKO Smart / Future Wallet Replacement Bill Compartment Better than the original! The bill compartment of my wallet broke (as is probably the case for many others), so I modeled the part to make a replacement. I printed it with…
A Wall Art dedicated to Goldorak. I used a children's coloring to create that model.
Crest of the Polish club from Cracow. Wisła Krakow has a conflict with the Cracovia club
Something I made during 2020. The middle layers are of clear PLA and the bottom and top layers are whatever color you'd like. R-Rated and G-Rated versions available. No supports required.
Use with caution! I do not guarantee this brake to work for every motorcycle, and it should not be regarded as an extra safety, just a fun model!
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
This is the tool that you didn't know you needed, and as such it makes a great gift. An improvement on the age old yard stick used for retrieving screws, balls, toys, coins or anything else that has fallen under a piece of furniture or…
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
When using 3d printed sliders like https://www.printables.com/model/890612-sky-team-boardgame-sliders-thin-brim or https://www.printables.com/model/711058-sky-team-board-game-sliders the ice breaking board does no longer fit well. With…
Protect your board's base when stacked for travel with other Quiver Connector and/or Ride Mode mounted boards. These quiver protectors are much more durable than the stock Karakoram foam quiver protectors. They are made from a durable…
a solution for keeping the magnet portion of a bike's brake sensor on the lever. adhesives not working? just set it in. Aditional material: a single M3 screw, nut, and some CA glue to keep the magnet to the holder in case of bumpy rides.
Remix of the alktopus. Changed the bottom part to fit Shot Glas with approx. 35mm in Diameter and 55mm in height.
This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…
Want to add a Reese Brakeman Brake Controller to your Toyota Tundra or Toyota Sequoia without drilling any holes? This mount just slips the brake controller on to the lower knee bolster of the dashboard and can slid off when not in use!…
About the J35 Draken The J35 Draken is a Swedish fighter-interceptor developed and manufactured by Saab between 1955 and 1974. The Saab 35 Draken is known for, among other things, its many "firsts" within aviation. It was the first…
Inspired by the suction cup holder by @AyyArr, made to print simpler. Does not require supports. The tag is held by friction (could be very tight fit - don't worry, it'll be fine). Printed with clear Prusament PETG. Used with 20mm suction…
I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…
After rescrewing the rod on the SRP brake for the thousandth time, I finally stripped the thread with some excessive force. Here's a replacement I quickly modelled up. Before you're worried, all the braking force will be handled by the…
Podstavec s kameny pro bosse a jeho stráž do hry Karak 2. Doporučuji tisknout dvoubarevně. Tisknul jsem na MK3S+, 0.20 Quality, PLA Galaxy black a silver.…
This is a mount for Big Tree Tech's Kraken. I needed a mount to add this to the all in one enclosure I am designing (I hate tipping my printer over to work on something). It has provision for M3 x 4 x 5 heat inserts. These are centered…
Werkzeug, um den Bremsschlauch einer Hydraulikbremse zu halten, um den Pin einzuschlagen. --- Tool to hold the hose of a hydraulic break to insert the end pin.
Bothered me the fake disc was black and wanted to print it in silver so created my own replacement fake brake disc for DumboRC DDF-350. Also moved the brake caliper to correct position and added versions with or without grooves. Will need…
A 1:1 scale model of a vehicle brake caliper, two piece rotor, bearing hub and spindle. Uses real tapered roller wheel bearings so the rotor spins freely! Mounted on stand legs to make a very nice desk model or even an educational tool to…
I printed it with durable tpu. If it will be used for dogs I recommend at least 4 top and bottom layers and 4 walls. If you want that the frisbee to last longer i would use 5-6 layers.
Golf Simulator Control Box A compact, high-performance control box designed for golf simulator shells. This model is smaller than previous designs, ensuring it prints faster and fits standard printer beds. It features the SkyTrak Course…
Insert pro hru Karak - 2. vydání (čtvercová krabice). Tato verze insertu pojme originální věž na dlaždice, 16 kusů mřížek a veškerá vydaná rozšíření. Rozměr insertu je 296 x 296 x 67 mm - insert nepasuje pro verzi KOSMOS! Mé inserty mají…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
Held on a playseat challenge thanks to this design: https://www.printables.com/model/302265-playseat-challenge-shifter-holder-shortened-attach The controller board and wires…
Grid holder for the game Karak 2 - it is compatible with these grids (up to 19+1 pieces): https://www.printables.com/model/1302628-karak-2-hex-grid-mrizky I printed on MK3S+, 0.20 Quality, PLA silver.…
My front disk brake had an incident and was no longer true (straight). I tried to bend it back in right position by using this device. You will need 2 M6 screws and nuts.
Kann ohne weiteres Zubehör montiert werden, Originalschraube ist lang genug.
Insert for the game Karak 2. This version of the insert holds base game + expansion Imperium + promo characters Victorius and the pilgrim Minimus + 6 figures + 20 pieces (19+1) of tile grids. Insert for Chaos expansion here:…
2 models provided. The larger size provides a more gradual taper, making it easier to spread the calipers. Use this if you have sufficient clearance or the calipers are removed from the mount. The short model works for limited clearance.…
two ULTRAKILL weapons the shotgun and revolver for the dummy 13 V1 or V2 these are both mine i have made these myself if more info is needed go to…
Stand for a Razer Kraken V4 Pro Headset, including the OLED Control Hub and Wiring, including holes for M3 Brass inserts
Resize magnet arm and magnet hole to handle up to 5 magnets.
shotgun ultrakill for dummy13 V1/V2 articulated: https://cults3d.com/:3117128
best to print as 80% gyroid or so.
Inspired by this guide for Meshtastic , this model , and the modifications noted in this guide , I created a mount for attaching a Harbor Breeze solar mesh node to a tree, with provisions for holding a right angle SMA connector and…
A device to prevent/reduce over-run of a filament spool when the extruder is starting and stopping. Print Settings Printer Brand: ELEGOO CENTAURI CARBON Rafts: No Supports: No Resolution: 0.2 or 0.3 (according to preference) Infill: 15%…
This is a remix of Original California Fastrak Flex CAV Holder by made_man on Thingiverse. It holds a California Fastrak Flex by sliding into the top driver side trim of your car or the trim behind the mirror. It may or may not fit your…
Arakawa family crest from Yakuza / Like a Dragon video game series. *Note: I'm new to 3D modeling, so the design and print profile might still be improved with some tweaking. Feedback is welcome!* I've also started a collection where I'll…
FAST PRINT I use it on my Magura MT5 Pro , but it should work with other brakes You can use this either for bleeding your magura brakes, or when traveling with uninstalled wheel It can be also used when you need to press pistons back ,…
Gedruckt mit Sunlu TPU-Silk. Eicher Königstiger 74 Zugmaul (Perkins Ausführung)
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro. This operates the same as the other FRAKS mounts for soldering…
Capture a moment of sweet slumber with this 3D printable STL model of a Cute Parakeet Sleeping. This peaceful perched bird is perfect for adding a touch of gentle calm and avian charm to your displays, shelves, or miniature aviaries.…
Unleash the legendary terror of the deep with this 3D printable STL model of The Kraken. This highly detailed octopus sculpt is perfect for adding a formidable and awe-inspiring presence to your fantasy displays, tabletop adventures, or…
I started building Mesh in my neighbourhood and tried out several radios. I wanted to have a printable case that could be used with multiple radios (Seeed, Heltec, RAK) in multiple configurations (with POE, USB-C, external…
🛸 Chibi Goldorak – Modèle STL à imprimer en 3D Plonge dans l’univers rétro-futuriste avec cette version chibi du légendaire robot Goldorak ! Ce modèle stylisé reprend les éléments emblématiques du mecha culte : les cornes dorées, le…
I’m excited to share my design for an insert/organizer for the Deluxe Edition of Marrakesh , including the metal coins, both expansions, the glass gemstones for the 2. expansion and the queenies 1 + 2 . (The Standard Edition should need…
This mod is designed for the popular low-cost USB handbrakes sold on AliExpress. The stock PCB is removed and replaced with: Sensor mount for a 49E linear Hall-effect sensor (fixed with hot glue, check the images) Magnet holder for a 8×3…
replacements for Mazda part numbers BF6751587 and BF6751597. These should be printed from something semi-flexible as the mounting tabs are a bit thin. I'd suggest SLS printing from Nylon. Design updated 3/20/2026 for better fitment!
Cache esthétique pour trak racer TR160 2 modéles un avec ergot à clipser mais surépaisseur un avec cache en biseau et pièce découpé. Nécessite pistolet à colle pour tenir bien, pas de surépaisseur , lisse le petit cache doit être imprimé…
3 perimeters 15% infill Printed with PETG No supports required Iron top surfaces (optional) EDIT: Replaced model file with corrected file. Original file had mounting holes at 5mm apart, but was not on a 5mm grid. Changed spacing for 5mm…
Simple indoor case with clip top for a PoE powered RAK WisMesh Ethernet Gateway. It's based on the RAK19007, RAK4631, RAK13800 and RAK19018 modules. I just used the integrated basic antennas and stuck them to the inner wall of the case –…
Behold, Tharrak the Enthused, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy resin…
Insert for Chaos expansion for the game Karak 2 - you can exchange it for the figure holder in my original insert - here is the link: https://www.printables.com/model/1316316-karak-2-imperium-insert One of the expansion paper figure is…
Just a board and holder for original design - for rest, you need to print https://www.printables.com/model/905414-meshcore-meshtastic-solar-node-rak-v3
