Skull & Crossed Wrenches Fan Grill for Satsana Fan Duct 40mm Heatbrake Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative fan grill for eric-anastas "Satsana Ender 3 Fan Duct".
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to replace the mutilated cover of my CTC.
While installing Erics duct on my Ender 3, my initial thoughts were “I'm digging how this attaches so easily and solidly to the hotend carriage, but thought the openings where the air exits the duct were too high and would lead to unwanted nozzle cooling.” I did multiple test prints, followed by a handful of lengthy difficult prints and it was clear that the print quality on that machine was drastically improved and I was somewhat mistaken with my initial thoughts. I went on to add it to my CTC instead of slapping the Ender 3's cover on it.
I don't like having wide open fans so I played around with different cover designs for the 40mm heatbrake fan and settled for a bit on a remix of Greco1970_200000's “Ender 3v2 Dragon head V Slot Cover” which I thought looked really cool. Yesterday I thought maybe my skull with wrenches might also make for a decent looking cover, so here we are…
I scaled the skull so there wouldn't be air obstructions and aligned the wrench openings so that a long hex key wrench could be used head on for installing the grill.
Printing this model I found to be a little difficult. I wanted the layer lines to appear horizontal on the installed part so I stood it on edge when I sliced it and used tree supports to buildplate only and added a brim for good bed adhesion. My first two attempts failed when the chin got knocked off the supports by the nozzle in the front. I tilted the model back by 15 degrees keeping the rest of my slicer settings and my third attempt was successful. I'm sure there are better ways to print this model, but I'm printing a second copy to install on the Ender3 right now using those same settings. If somebody comes up with a better way to print this, please comment so that others may benefit from your experience.
I don't expect much interest in this design since it's singular purpose is pretty niche, however, if there is interest, I may publish a multi-part version in coming months so that the grill base can be printed in your machines base color, the skull in white, and wrenches in silk silver. I think that would look great, but I also think this model looks pretty nice as is, so I'm unlikely to revisit it just for myself.
I'm including the slice g-code file that I'm using to print this on the Ender3, which is something I never do as everybody's machines are setup differently, but it might save somebody some grief who is having a more difficult time printing this than I did…