1 / 2
Brake shim for OXELO Freestylestep MF500 — zdjęcie 1
1 / 2

Brake shim for OXELO Freestylestep MF500

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,09 € – 0,11 € netto (bez VAT)

Dla pliku: brake_shim_0.3mm_PLA_MK3S_7m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,10 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
6,6 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A shim to mount between brake metal and frame to make it easier (for smaller kids) to brake

Ocena
0 / 5
Polubienia
0
Pobrania
18
Wydruki
1
Wyświetlenia
359
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

We have a OXELO Freestylestep MF500 step for the kids. While it's a good and sturdy step, braking takes quite a lot of force/weight. The kids have to press really hard on the brake metal before it even touches the wheel, therefore creating potential dangerous situations if a sudden brake is needed.

This model is a shim that can be printed in a few minutes and is placed between the brake metal and the bottom of the (inside of the) frame. When the brake metal is then mounted as far as possible to the back (towards the wheel), it just clears the wheel. This means a lot less pressure is needed to activate the brake.

Print in any plastic, but with 100% infill. The model has a lip attached to keep it in position while fastening the bolt, that can be torn off once installed. It's a bit fiddly to slide the shim into the frame with the back wheel attached, but it's certainly doable.

Before:

 

 

 

 

 

 

 

 

 

After:

Tagi