1 / 2
Brake shim for OXELO Freestylestep MF500 — image 1
1 / 2

Brake shim for OXELO Freestylestep MF500

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A shim to mount between brake metal and frame to make it easier (for smaller kids) to brake

Rating
0 / 5
Likes
0
Downloads
18
Makes
1
Views
359
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

We have a OXELO Freestylestep MF500 step for the kids. While it's a good and sturdy step, braking takes quite a lot of force/weight. The kids have to press really hard on the brake metal before it even touches the wheel, therefore creating potential dangerous situations if a sudden brake is needed.

This model is a shim that can be printed in a few minutes and is placed between the brake metal and the bottom of the (inside of the) frame. When the brake metal is then mounted as far as possible to the back (towards the wheel), it just clears the wheel. This means a lot less pressure is needed to activate the brake.

Print in any plastic, but with 100% infill. The model has a lip attached to keep it in position while fastening the bolt, that can be torn off once installed. It's a bit fiddly to slide the shim into the frame with the back wheel attached, but it's certainly doable.

Before:

 

 

 

 

 

 

 

 

 

After:

Tags