RAK19003 LoRA Meshtastic Solar node enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Enclosure for a RAK19003 board with solar panel and battery. Have space for a cavity filter inside.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model to make a water resistant case for a RAK based LoRA node.
Its made to have a n-type chassi mounted connector on top that is sealed with a o'ring and a 145x145mm solar panel on the front.
It has build in cannels for cable ties on the back and space for a cavity filter or a large battery pack.
Parts needed:
RAK19003 board with LoRA module
LiPO Batterypack (i used a 2000mAh one)
145x145mm 5V solar panel
n-type to SMA chassi connector
ipex to SMA cable
SMA to SMA cable
Cavity filter for 868Mhz
Screws and sealant:
2mm O'ring cord ~50cm
O'ring 14x17x2,5mm
Silicon to seal the edge of the solar panel to the mount.
4x M3x10
14x M3x40