ELU TGS 171, Turn-knob - M6 (942234-00)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looking for a new turn-knob for your old ELU saw?, then this is something you should checkout!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Did you lose or break one of the turn knobs on your ELU saw?
Well i have a solution for you!
Hardware needed:
1x M6 nut
Preferably "high" variant, though stacking normal nuts is also possible
2x M3 screws (Designed for socket head, but pan/hex head also works)
Length can be between 8mm -> 16mm*
*For socket head to be "inside" knob body max length is 12mm
How to assemble:
Insert M6 nut/nuts
Close the 2 halfs
Screw the 2 M3 screws directly into the bottom half (It's designed for them to cut their own threads)
Recommend Print Settings:
Material: PLA, PETG or ABS
Layer height: 0.1mm to 0.15mm
Perimeters/Walls: 5
Supports: OFF! (Model is designed to print without supports!)
Brim: 4mm (Only needed if not using glue on print bed)
Infill: 15% to 30%
Print orientation: See pic below

Not correct thread or some other idea for improving the model?
Don't hesitate to get in contact, and we will make one with that angle!
Looking for other 3D-Printable stuff for your ELU tablesaw, then checkout this collection:
https://www.printables.com/@markaabo_566920/collections/3024699