1 / 4
ELU TGS 171, Turn-knob - M6 (942234-00) — image 1
1 / 4

ELU TGS 171, Turn-knob - M6 (942234-00)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Looking for a new turn-knob for your old ELU saw?, then this is something you should checkout!

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
67
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Did you lose or break one of the turn knobs on your ELU saw? 
Well i have a solution for you!

Hardware needed:

  • 1x M6 nut

    • Preferably "high" variant, though stacking normal nuts is also possible

  • 2x M3 screws (Designed for socket head, but pan/hex head also works)

    • Length can be between 8mm -> 16mm*

*For socket head to be "inside" knob body max length is 12mm

How to assemble:

  1. Insert M6 nut/nuts

  2. Close the 2 halfs

  3. Screw the 2 M3 screws directly into the bottom half (It's designed for them to cut their own threads)

Recommend Print Settings:

  • Material: PLA, PETG or ABS

  • Layer height: 0.1mm to 0.15mm

  • Perimeters/Walls: 5

  • Supports: OFF! (Model is designed to print without supports!)

  • Brim: 4mm (Only needed if not using glue on print bed)

  • Infill: 15% to 30%

  • Print orientation: See pic below

Not correct thread or some other idea for improving the model?
Don't hesitate to get in contact, and we will make one with that angle!

Looking for other 3D-Printable stuff for your ELU tablesaw, then checkout this collection:
https://www.printables.com/@markaabo_566920/collections/3024699

Tags