Loxone NFC Code Touch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Weatherproof protective cover for Loxone NFC Code Touch
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Weather-proof cover for Loxone NFC Code Touch keypad. This cover is designed to protect the device from rain and snow. It has a simple, minimalistic, and functional aesthetic. It is designed to slide directly onto the keypad. No screwing to the surface.
The cover features several smart design elements:
Sloped Roof: A slight incline to effectively drain water away.
Drip Edges: Integrated channels below the roof and at the bottom to prevent water from running back under the cover.
Ventilation: A bottom-facing vent to prevent moisture buildup.
Anti-Theft Protection: The snug fit makes it significantly harder to remove the keypad. To remove the cover safely, I recommend using pliers to avoid damaging the wall surface or the keypad itself.
Rounded Corners: A sleek, modern finish that complements the device.
There are two versions of the cover:
Tight Fit (inner width 90.2 mm): Ideal for a secure, friction-fit installation without adhesives.
Loose Fit (inner width 90.4 mm): Recommended if you plan to use a silicone or PU sealant for a permanent, waterproof bond.
Orient the cover face-down on the print bed to minimize warping. This ensures the back side remains perfectly flat, providing a tight seal to prevent water ingress. I recommend PETG filament, standard supports and a brim.