Spray paint can mixer - shake those aerosol rattle cans easily!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of shaking spray paint? Use this instead. Requires a 5/16 inch or M8 nut & bolt. Spins off-axis to shake and mix
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 297
- Wydruki
- 3
- Wyświetlenia
- 1743
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Includes step files, Prusa Slicer .3mf file, and the fusion 360 file. The hole size is for 67mm or smaller cans.
Use a 5/16 inch nut and bolt or M8 nut and bolt. You will need some type of thread locker to secure the nut in place, like loc-tite adhesive or a nylock nut. If you skip some type of thread locker the nut will rattle itself loose.
Secure cans with the included fastener. Fits standard US sized aerosol spray paint cans. The bolt hole is a few millimeters off center so the can gets shaken. Spin in forwards and reverse a few times with a hand drill.