Mitered Drop Ceiling Wall Angle Corner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover to put on outside corners to hide the seam if you're not skilled enough to miter it yourself
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
The ones from suppliers are really expensive so I designed this just incase someone wants or needs to replace/install them. Comes with the supports baked in and is designed to break off with a pair of small needle nose pliers.
Print at the smallest layer you can(either .10 or .15) and with zero supports. The smaller the better. Make sure detect thin walls is on
Also this part is probably best printed out of PLA. I haven't tried it with PETG but I'm assuming with the amount of overhangs, it won't print well.