1 / 2
Mitered Drop Ceiling Wall Angle Corner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover to put on outside corners to hide the seam if you're not skilled enough to miter it yourself
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
The ones from suppliers are really expensive so I designed this just incase someone wants or needs to replace/install them. Comes with the supports baked in and is designed to break off with a pair of small needle nose pliers.
Print at the smallest layer you can(either .10 or .15) and with zero supports. The smaller the better. Make sure detect thin walls is on
Also this part is probably best printed out of PLA. I haven't tried it with PETG but I'm assuming with the amount of overhangs, it won't print well.