Micro Case for ESP32-S3 Seeed Studio Xiao Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very small case for Seeed Xiao ESP32-S3. Fits many other Xiao ESP32 boards. Allows access to GPIO/Antenna/solder pads.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a case designed for the ESP32-S3 by Seeed Studio. Uses pressure tabs for a secure lid fit.
It's small, with cutouts for running the antenna or cables to the GPIO pins and/or solder points on the bottom of the board (including LiPo battery input). There are holes cut to allow a paperclip to press the reset and boot buttons.
This will NOT fit boards with fully soldered GPIO headers - specifically, the rearmost (D6 and D7) pins block the case from closing if the metal headers are soldered. but those are accessible with plain soldered wire (it's the plastic spacers on the soldered pins that block case closure). In short, you can't have soldered GPIO headers with this case, at least not on all pins.