Lovesac Cup Holder Standard Side
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remodel has a solid basket making it easier to print on small printers.
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Public Domain
Designed to fit the standard side of a Lovesac couch.
Includes cupholder with mug cutout, cell phone holder, and basket.
There is a problem with my remotes falling into the basket and since I redesigned this to print better on a smaller bed I have some solutions in the works. Once there are complete I will link them in here.
This is were you can go to find the insert to create separation in the basket. "link"
This version has a base to create a more natural look and hopefully not move inside the basket. "link"
I used PLA for this print and some crazy settings to see if it would work.
Wall loops: 6
Infill: 15%
Layer height: 0.20
Nozzle: 0.40
Top and bottom layers: 5
Infill pattern: Gyroid
I used this as a base and messed around with filament setting and speed slowing it way down to 30mm/s on first layer and 80mm/s for infill. You should use supports but make sure they are only on the bed so you do not have a lot of post print work to do. I changed a lot all in the hopes of making it impossible to break and with my testing of 10 foot drop tests and trying to break it with my hands I can happily say it is just fine and still fits perfectly on the arm of the Lovesac standard sides.
Enjoy!