TRMNL OG 7.5″ DIY Kit Base – No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom 3D-printed base for the TRMNL OG 7.5″ DIY kit by Seeed Studio. Easy-to-print, no-support.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 155
- Wydruki
- 2
- Wyświetlenia
- 861
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
TRMNL OG Kit Base (Seeed Studio)
This is a custom base designed for the TRMNL OG 7.5" DIY Kit from Seeed Studio.
The base is made of two simple, easy-to-print parts and requires no supports.
The design focuses on clean assembly and secure mounting:
The battery slides into a dedicated compartment in the base.
The main board is mounted using small self-tapping screws, directly into the base.
The e-paper display fits snugly in the front part of the base.
After connecting the board and the screen, the two parts are joined using M3 screws that thread into heat-set inserts embedded in the base.
The result is a sturdy, clean enclosure that is easy to assemble and suitable for everyday use.
Parts Required
4 × M3 heat-set inserts
4 × M3 screws
4 × small self-tapping screws (for mounting the board)
(Optional) Double-sided tape for securing the battery
Compatible Kit
Designed specifically for this kit from Seeed Studio:
https://www.seeedstudio.com/TRMNL-7-5-Inch-OG-DIY-Kit-p-6481.html