Replacement Rubber Jaw Pad for Renault Roof-Rail Crossbar Clamp (SKU 82016221120)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for Renault Grand Scenic (2016 - 2022) roof base carriers (for models with roof rails)
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 96
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
Description
This 3D-printable rubber replacement pad fits over the movable jaw of the clamp used on a roof-rail-mounted crossbar system (similar to those used on Renault Grand Scenic 2016–2022 OEM roof bars with manual screw clamps). The pad is contoured to wrap around the jaw’s hook-shaped contact surfaces.
Compatibility
Intended for roof-rail crossbar clamp systems with screw-operated jaws (movable hook opposite fixed bracket). Modelled specifically after OEM Renault roof bars (part number 8201622112) that use that clamp mechanism. The width of the metallic jaw is 85 mm, the overall, outer length of the pad is 95 mm. Hence it should fit other crossbars with that dimension of the jaw. if you're unsure, the original pads are made of SEBS are feature product No. 8540866001. Google finds that part No. in the Thule catalogue and I actually also think this OEM part is originally made by Thule but could not confirm. | ![]() |
|---|
Printing
The pad is easily printed without supports if you choose a suitable orientation. See the attached 3mf for inspiration. I print in TPU, with the standard 0.4-mm nozzle at 0.2-mm layers.
