Liczymy pasujące modele…
Filament spool (interlocking) crossbar - Husky shelf [Cross bar - black] Dimensions 18.1 x 18.09 x 226 [Tube (Interlocking) - grey] - mesh boolean Dimensions: 22.8 x 22.75 x 181 If you want to have a filament spool holder but don't want…
Download: https://makerworld.com/de/models/2738012-crossbar-relocation-tensioner-zero-g-mercury-one#profileId-3035756 Crossbar Relocation mit Tensioner für Zero G mercury one es wird ein 370mm Alu 2020 vslot profil benötigt.
Holes added on the bottom for M4x8 threaded inserts
Introducing The Adélie Utility Knife This is a fully functional 3D printable utility knife that takes standard Stanley style blades. Too broke to afford a Benchmade? Too cheap to spring for a CQC? Just print one of these, which is totally…
Rivian crossbar wall mounts with added extra support around the mounting points to prevent breaking under weight.
Brackets to lower the front crossbar on the Ender 5 (or similar), to make it easier to see what's printing. Buy me a coffee No additional fixings are required - just use the 3 bolts which secure the original corner brackets and crossbar.…
Sadteeto made an excellent Starlink Mini mount for most standard roof bar sizes. I have a solar array on my roof bars which gives me little to no space for the mount so I had to make it skinnier. It now fits between my panels and still…
Rivian Cargo Crossbar mount to attach to a bed wall MOLLE panel or wall. I have the Builtright one, but there is no reason it wouldn't work on the s00nish variant. Uses ¼-20 stainless countersunk hardware (at least 1 - 1 ½" long) and a…
Print using c24w's original instructions. I have printed in PETG with 30% gyroid infill but that may be overkill!
Many stock mobile phone handlebar mounts i tried are quite high and thus less stable during the ride. I wanted something as close to the mounting bar as possible, also i wanted it mounted on crossbar, which is much thinner than…
I created this bracket to solve the problem of my power strip hanging about an inch off the ground when standing at my Uplift desk. Printing two of these brackets allows the power strip to be mounted onto the crossbar and off the floor.
I modified this Yakima adaptor to work with the bulky Rivian OEM cross bars by assembling it with the mount created by Tinker86 on Thinkgiverse (https://www.thingiverse.com/thing:6533914). It is designed to be used with standard insects T…
This is a bracket to relocate the front crossbar of the Ender 5 Plus to get a better view of the build plate. You may locate the crossbar at any height you find suitable for your setup. Also consider printing the End Covers that protects…
An end cover for the Ender 5 Plus to cover the sharp edges of the exposed beams when relocating the crossbar. You can find the crossbar relocator here: https://www.prusaprinters.org/prints/116582-ender-5-plus-crossbar-variable-relocator…
Create spacers to allow the Yakima FatCat ski racks to be mounted to a Rivian crossbar with stainless T-Nuts. Used the following T-Nuts from Amazon. 6mm x35mm https://www.amazon.com/dp/B09TYS712R?ref=fed_asin_title&th=1&psc=1 The notched…
Náhradní krytka na příčník compass. Šedý kus na fotkách je testovací, černý matný originální. Foto na autě je vytištěný kus, Prusa galaxy black 0,4n. Zamykací kolík je v různých délkách po 1mm. Vyzkoušejte, který Vám sedne nejlépe……
I really liked the idea of this crossbar remix, but I already printed the original pastamatic crossbars and didn't want to waste filament in printing entire new ones (yes I'm cheap :P ). So I modeled some clips to glue in place manually.
I needed to manage the wires on the underside of my Uplift standing desk, and I didn't want to use the included adhesive cable tie mounts. So I printed these wire management clips. There are two sizes of clips: Smaller size that snaps…
Printable Crossbars and Crossbar Mounts for SCHLEPP ONE Camera Cart. Required for mounting the SCHLEPP ONE Middle Shelf: 1x Crossbar Long 1x Crossbar Medium 4x Crossbar Mount Set of Screws required (included with Middle Shelf purchases):…
Mount should be printed with ABS, PA 6 or PA12 for best performance. We do not assume any liability for the use of self-printed accessory parts. Before use, we recommend conducting your own load tests. For prototypes, we have consistently…
This allows you to hang your Rivian Cargo Crossbars on a Rubbermaid Fasttrack. Prints on its side with minimal supports. I used tree supports and higher infill for strength.
Anthead Crossbar Docks for Madmax Toolchanger These toolhead docks are designed for the Madmax Toolchanger system and are compatible with Voron Trident and similar static gantry printers. The docks mount to a 2020 extrusion oriented in…
Závěs na příčníky od firmy Neumann Holder for Neumann corssbars Upevnění vrutem 6,0 x 30
Hello, Today I have for you a Crossbar Cover for a FORD Focus car. They are suitable if you lose the original. They fit practically every crossbar model. I used ASA/PETG as the material. You need to use supports If you are interested in…
🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian . Crossbar No-Latch Tool This simple tool is designed to slide in from the underside of your crossbar…
Disappointed with the clunkiness of the printed parts to the enclosure for the FlashForge AD5X I tweaked the files provided on FlashForges website to something closer to my tastes. Initially this was to remove the recessed printer name…
If you want super consistent spacing and mounting of hoiday lights on your crossbars, this will do it for you. There are 3 main components: 4-piece Rail Insert: Each channel in each side of each crossbar gets 2 of these. They hold 4…
I designed this to fit over the end of a piece of crossbar to assist with lifting the crossbar to heights beyond one's reach. (similar to "crossbar lifter" and "E-Z Up")
If you want to place something above the printer but don’t want to put stress on the top plexiglass—perhaps to avoid bending or causing issues with the print head when opening the ventilation Material: Prusament PETG, 20% infill, 0.4…
This is designed to provide tiller extension storage for hobie beachcat sailboat. Specifically designed for the Hobie 17 18 20 or 21. This provides a place to store the tiller extension stacked on the crossbar. Feel free to take the idea…
Description This 3D-printable rubber replacement pad fits over the movable jaw of the clamp used on a roof-rail-mounted crossbar system (similar to those used on Renault Grand Scenic 2016–2022 OEM roof bars with manual screw clamps). The…
This mount holds the Aoci as close as possible to the crossbar so it doesn't stick out. It's designed for a 25mm crossbar, which is what the V Strom 1050 has (25.5mm to be precise).
Filament spool (interlocking) crossbar - Husky shelf [Cross bar - black] Dimensions 18.1 x 18.09 x 226 [Tube (Interlocking) - grey] - mesh boolean Dimensions: 22.8 x 22.75 x 181 If you want to have a filament spool holder but don't want…
Starting point for creating a custom Rail for the main crossbar of an Embassy suspended ceiling panel kit from Costco I'm creating some custom rail pieces for an area where the standard rail attachments can't be used due to restricted…
I created this mount in Tinkercad to allow me to add a very strong, low-profile, aerodynamic radio antenna to a Rivian R1 vehicle. You need something like the Megawatt cargo crossbar adapter, or something else that mounts to the crossbar…
Cybertruck Level Bar Angle Adjustment Wedge (for Tesla Factory Crossbars) This wedge is designed to correct the angle of a level bar when mounting it to the Tesla factory crossbars on the Cybertruck . Because the geometry of the…
Inspired by: This model uses M5x(8 or 10) screws and T-nuts instead of the original screws to secure the crossbar. It is more secure for applications such as installing a nozzle-wiper/purge bin. BOM Name Amount M5x8 Screws 6 M5 T-Nuts 6
This is simply a cut down version of the connector found on Thingiverse sized to 225mm length for use with smaller print beds. To be used with Adjustable Laptop Stand
Crossbar holder that is put on a 2cm diameter wooden pole (height can be adjusted by sliding) and holds a crossbar for jumping over it. Goes together with the hurdle stand: You would need to print both the stand and the crossbar holder…
3D printed crossbar for bike accessories. This design contains two adapters one set for 24mm handlebar and one for 28mm handlebars. Perfect fit on straight handlebars, but can be fitted on custom shaped and angled handlebars as it is on…
Ender 5 Crossbar Leider noch nicht getestet Unfortunately not yet tested Print Settings Supports: Yes Resolution: 0.2 Infill: 15% Filament: - PLA Notes: I used red fillament because I don`t have black filament at this moment. Will paint…
I have two pairs of crossbars (reasons), and don't like to leave the roof ones on, due to wind noise and efficiency. They are a bit cumbersome and take a decent amount of space in the frunk or gear tunnel, so I decided to create a mount…
*** EDIT I added a revised version that's a bit sturdier. I recommend you print that one.*** I wanted to add Christmas lights to my crossbars but didn't want to wrap them or zip tie every light. I also like when lights are all in the same…
Relocates the x-axis crossbar and covers the nuts for the belt tensioner
This is a re-design of JohnA's ski roof rack made to fit my roof rack crossbars of this brand: https://www.amazon.ca/gp/product/B00GA2HKAU, and sized for xcountry skis instead of downhill (you can just use 2 for downhill if you like, it…
I have the filament spoolfeeder on the right side of the printer attached to the wall. so I felt that the BTT filament sensor is better positioned on the top crossbar (a 2020 profile) and fed through 2 pulleys with bearings (other…
This was tested with Crossbars purchased in 2023 using ABS filament. I do not recommend using PLA as temperatures inside the bed can get high enough to melt and deform PLA. BOM: 2 x 30mm M6 Bolts 2 x M6 Washers Mounting Instructions:…
These allow you to mount your crossbars on the wall however you'd like. I wanted separate brackets so I could have towel racks when the bars aren't installed on the truck.
printing I did print this in PLA with a 0.4 nozzle and 0.3 mm layers. U shape is 100 % infill, plug are 30 % infill rectilinear but I am not sure it matters a lot :) . usage Plugs are tight, you may have to use some force to make them fit…
Download: https://makerworld.com/de/models/2738012-crossbar-relocation-tensioner-zero-g-mercury-one#profileId-3035756 Crossbar Relocation mit Tensioner für Zero G mercury one es wird ein 370mm Alu 2020 vslot profil benötigt.
I created these wall mounts for when I'm not using my crossbars on my R1T. I used drywall screws to secure them to the wall. Drywall anchors are recommended if not screwing into a stud. PTEG seems to hold up fine but printing in ABS, ASA,…
I needed the crossbar a little lower for the front purge bucket that I had. I also had to cut the front part of it off because of the bucket but not necessary if you don't have one.
The Crossbar used to fix each end is too loose for my liking. Use M3 bolts and nuts to secure the crossbar to each cradle. Orientation Print as it is, no support is needed. BOM 4 x M3x12 4 x M3 Nuts (6 for each if intend to fix the wiper)
Stl:s now with mounts for 3030 rails…
Holes added on the bottom for M4x8 threaded inserts
Crossbar Remix for Pastamatic Filament Spool Winder with mounts for 2020 extruded aluminum. printed on x1c with 0.4 nozzle in overture Space Grey PETG .20mm std profile with the following changes: .20mmm layer height 4 wall loops 4 top…
Update 9.18.24: I re-uploaded 270mm and 540mm files because there was a dimensional error. Also tested on Bambu P1S in PETG, but I still recommend ASA for UV resistance. Printed on QIDI X-Smart3 with QIDI branded ASA filament on default…
This mounts your iPhone or smartphone to the crossbar of a newer Trek bike with a modern flattened crossbar. This fits a Dual Sport 3, but likely fits most modern Trek models. iPhone holder can be tilted to optimize angle of view. Also…
This is meant to work in conjunction with my tophat mod , it can each over it and provide a stable platform to mount things above the top of the printer such as an ERCF. Print 4 of these This is meant to attach to a M5 Threaded 2020…
NOTE: If these have helped your crossbar whistles, please leave a make or a comment 💭 and let me know! 🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian .…
I didnt want do switch the front extrusion to 2040, so i instead did some simple modifications to an piece of aluminium angle. I used a pice of scrap that now is 20X23mm and 3mm thick. If you order a piece i redommend 25x25x3mm. For my…
Introducing The Adélie Utility Knife This is a fully functional 3D printable utility knife that takes standard Stanley style blades. Too broke to afford a Benchmade? Too cheap to spring for a CQC? Just print one of these, which is totally…
I printed as positioned, with the diagonal end on the print plate. This gave a nice combination of strength at quality at 0.24mm layer height.
I added holes at the end for hooks to add options for securing cargo.
The model is only one leg, you need to duplicate and mirror in the slicer to get both as they're symetrical. The length stays the same so the angle range doesnt change from the original. IMPORTANT : the order of instalation matters. First…
Note: Please be sure to use the R1 STL models. They have better clearance hole sizes. I have a roof rack on my camper van that is 69 inches wide. It has two 8020 40-4040 crossbars across the top. These 3D-printed shapes are intended to…
Made replacement for broken one. Print with supports.
