Zelevons: XR Style Footpad Plates, Crossbars & Bolt Tracks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
XR-frame compatible footpad attachment system allowing custom hook/wedge setups and any variety of printed footpads.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
These open-source Zelevons provide sturdy mounting interfaces for XR-style footpads, with excellent contact across rails and bumpers and compatibility with any 3D printed footpad (default fit Mathpads 5+0). Would also work with other footpad styles, though this would require adjustment to the angles of the base pieces.
Available as Front/Rear Plates (20° or 25° front) or Front/Rear Tracks, each configured left or right foot forward.
Thank you to Ranth for his original designs of the Mathpads! You can find more information on those in the Vescify Projects thread.
This style of footpad attachment mounts is advantageous for a couple of reasons.
They provide a very strong attachment point for both the screws coming up through the bumper and the ones going down into the rails/box
They remove any force applied by the rider on the pad when using hooks, wedges, or the likes. Instead, force is transferred directly down into the bumpers and rails. No more concerns about sensors getting messed up, or pads ripped apart.
They provide adjustable mount points for a variety of existing hooks, wedges, and other footpad mounts that are out there
They can work with any 3d printed footpad
Main Features
Open source
Improved design vs others out there:
Focused on strength in multiple areas that other similar designs have broken commonly (namely, the track ends, track and plate base pieces) or are generally too weak (thread depth is 9mm for all load bearing screw holes)
Better contact across rails and plates
Thicker materials throughout
Base/plate joining screws, for easy preparation and assembly while installing in the pad
Accessory mount holes
Compatible with any 3D printed footpad, if desired. Not locked to one footpad type.
I have licensed these as non-commercial. If you would like to sell them, just shoot me a DM first :) Otherwise, please shared your remixes and other related adjustments as you like!
All Parts Recommend Materials
7075 aluminum
Parts List for Setup
See "Parts Combinations" for some suggestions on what you may want to order for a full setup
All tapped holes are M5
You'll want a variety of M5 screws ranging from M5x12 to M5x35 as necessary to attach to your bumper / box.
If you are using #10-32 XR controller box(es) [stock, CNC Pubbox, and others] be sure to use correct #10-32 screws when attaching to your box, rather than M5.
If you are using M5 XR controller box(es) [Fungineers, and others] be sure to use correct M5 screws when attaching to your box, rather than #10-32