Ender 5 Front Crossbar Relocator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lower the Ender 5 (or similar) crossbar, to make it easier to see what's printing. No additional hardware required.
- Ocena
- 4,96 / 5
- Polubienia
- 198
- Pobrania
- 1462
- Wydruki
- 33
- Wyświetlenia
- 6590
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Brackets to lower the front crossbar on the Ender 5 (or similar), to make it easier to see what's printing.
No additional fixings are required - just use the 3 bolts which secure the original corner brackets and crossbar. You'll probably need to loosen the largest (black) bolt on the bracket which holds the Y-axis belt under tension, to create a bit of play.
Inspired by this, but I wanted the bar on the outside, so designed this from scratch.
Printed in PLA with 30% infill; 1mm top/bottom thickness; and 1.2mm wall thickness.
Print upright, as orientated in the supplied STLs. The left/right brackets are identical, but mirrored.