Ender 5 Front Crossbar Relocator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lower the Ender 5 (or similar) crossbar, to make it easier to see what's printing. No additional hardware required.
- Rating
- 4.96 / 5
- Likes
- 198
- Downloads
- 1,462
- Makes
- 33
- Views
- 6,590
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Brackets to lower the front crossbar on the Ender 5 (or similar), to make it easier to see what's printing.
No additional fixings are required - just use the 3 bolts which secure the original corner brackets and crossbar. You'll probably need to loosen the largest (black) bolt on the bracket which holds the Y-axis belt under tension, to create a bit of play.
Inspired by this, but I wanted the bar on the outside, so designed this from scratch.
Printed in PLA with 30% infill; 1mm top/bottom thickness; and 1.2mm wall thickness.
Print upright, as orientated in the supplied STLs. The left/right brackets are identical, but mirrored.