Rivian Crossbar Inserts, Set of 180mm, 270mm, & 540mm length
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model intendeds to solve issue with whistling noise coming from Rivian crossbars.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 1757
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 9.18.24: I re-uploaded 270mm and 540mm files because there was a dimensional error. Also tested on Bambu P1S in PETG, but I still recommend ASA for UV resistance.
Printed on QIDI X-Smart3 with QIDI branded ASA filament on default settings.
Layer height: 0.2mm
No supports needed.
Infil: n/a
Instructions:
Each side of the Crossbar on Rivian trucks is ~540mm, you could print 3 of 180mm, 2 of 270mm, or single 540mm file if your printer is large enough.
Bonus points if you can match color of your truck!
Goodluck!