Zyliss Cheese Grater Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A completely 3D-printed replacement handle for a Zyliss cheese grater. 3 parts, modelled mostly after the original.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Open Community License v1
Description
Old handle got destroyed in the dish disposal by a housemate.
Saw one that looked similar but required a metal nut/bolt that I do not have. Wanted to make a version that is completely 3D-printed and also that 100% fits with my grater.
I basically measured/copied the original handle 1:1, then had to create my own rotating handle assembly to print alongside it.
Instructions
Parts List:
(1x) Cheese Grater Handle
(1x) Handle
(1x) Nut
All parts printed at 0.12mm layer height, 3 walls.
Handle and nut are less critical, but cheese grater should be printed at ~30% cubic infill given its loads.
Printed out of PLA with 0.4mm nozzle.