Zyliss Cheese Grater Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A completely 3D-printed replacement handle for a Zyliss cheese grater. 3 parts, modelled mostly after the original.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Open Community License v1
Description
Old handle got destroyed in the dish disposal by a housemate.
Saw one that looked similar but required a metal nut/bolt that I do not have. Wanted to make a version that is completely 3D-printed and also that 100% fits with my grater.
I basically measured/copied the original handle 1:1, then had to create my own rotating handle assembly to print alongside it.
Instructions
Parts List:
(1x) Cheese Grater Handle
(1x) Handle
(1x) Nut
All parts printed at 0.12mm layer height, 3 walls.
Handle and nut are less critical, but cheese grater should be printed at ~30% cubic infill given its loads.
Printed out of PLA with 0.4mm nozzle.