1 / 3
Pill Box, Pill Tube / Pillendose, Pillenröhrchen — zdjęcie 1
1 / 3

Pill Box, Pill Tube / Pillendose, Pillenröhrchen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small and simple container for pills.

Ocena
0 / 5
Polubienia
6
Pobrania
56
Wydruki
0
Wyświetlenia
176
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here is a very simple pill box. No frills, no thread, small and neat. The lid is printed in TPU, the little tube can be made from any filament.

If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used.
The model is designed with an inner diameter of the tube of 14 mm.
If, for example, an inner diameter of 18 mm is required, the scaling factor in the slicer is calculated as follows:
x = y = (100 × 18) / 14 = 128.1%

The outer height of the tube is 48 mm.  If, for example, an outer height of 70 mm is required, the scaling factor in the slicer is calculated as follows:
z = (100 × 70) / 48 = 145.8%

Have fun!

Tagi