1 / 3
Pill Box, Pill Tube / Pillendose, Pillenröhrchen — image 1
1 / 3

Pill Box, Pill Tube / Pillendose, Pillenröhrchen

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small and simple container for pills.

Rating
0 / 5
Likes
6
Downloads
56
Makes
0
Views
176
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Here is a very simple pill box. No frills, no thread, small and neat. The lid is printed in TPU, the little tube can be made from any filament.

If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used.
The model is designed with an inner diameter of the tube of 14 mm.
If, for example, an inner diameter of 18 mm is required, the scaling factor in the slicer is calculated as follows:
x = y = (100 × 18) / 14 = 128.1%

The outer height of the tube is 48 mm.  If, for example, an outer height of 70 mm is required, the scaling factor in the slicer is calculated as follows:
z = (100 × 70) / 48 = 145.8%

Have fun!

Tags