Oral-B Ladeschale / Charging Cradle for Oral-B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Permanente Ladeschale für die Zahnbürste permanent charging cradle for your toothbrush
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Deutsch:
Diese Ladeschale für eine el. Oral-B Zahnbürste kann unter dem Spiegelschrank im Bad geklebt werden (vorzugsweise auf der linken Seite ;) und nimmt das originale Ladegerät auf. Bei Nichtgebrauch kann es einfach unter den Schrank geklappt werden und ist außer Sicht, aber jederzeit wieder verfügbar.
Der Druck sollte ohne Suppot möglich sein. Benötigt werden zwei Einschmelzmuttern M3 und entsprechende M3-Schrauben (20mm) .
Das Stromkabel wird durch den "Kabelkanal" auf der Rückseite der Halterung geführt und kann mit dem "CableGuide" zusätzlich fixiert werden (Superkleber hilft ;)
In den Bildern ist die Halterung unter den Schrank geklebt.
English:
This charging cradle for an Oral-B electric toothbrush can be attached under the mirror cabinet in the bathroom (preferably on the left side) and holds the original charger. When not in use, it can simply be folded under the cabinet and is out of sight, but available again at any time.
Printing should be possible without support. Two M3 insert nut and a corresponding M3 screws (20 mm) are required (flathead).
The power cable is routed through the “cable channel” on the back of the holder and can be additionally secured with the “CableGuide” (super glue helps ;)
In the pictures, the holder is attached under the cabinet.