Lego 75375 Height Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension piece to modify Lego 75375 display height.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand extension modification piece to raise Lego set 75375 on the original display piece.
Designed for use when displaying two similar units alongside each other to allow for overlap.
It sits snugly around the original stand protrusion and has its own protrusion and support pieces to mount the Lego set onto.
In this instance, it’s to display the original Millennium Falcon set and a modified Otana set built from the same base Lego set.
Two versions are included (35mm height difference).
Printed in PETG with a 0.4 nozzle at 0.20mm, but higher layers should be OK.
Recommend 4 perimeters/shells.
Printed laying flat with supports under the upper extension piece.
CAD files are included for any required height changes.