1 / 7
Prusa CORE One Waste / Purge / Trash Bin (Magnet 12 or 8 mm no glue)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament collection tray for the Core One. For use with magnets 12 or 8 mm. No glue needed.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 2
- Wyświetlenia
- 662
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (26)Powiązane
Filament collection tray for the Core One. Follows the contour of the print bed. The existing Z-axis screws are used for positioning.
You can use 12 or 8 mm magnets for fixation. No glue is needed. Just press in.
A version is available if the Z-axis dust covers are used.
Optionally with or without texture.