Dehydrator Tray Extension for Westinghouse WFD101W (Single Part)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of David H. Brown's "Dehydrator Tray Extension" specifically for the Westinghouse WFD101W dehydrator.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of David H. Brown's "Dehydrator Tray Extension for Commercial Chef CCD100W6 (formerly Westinghouse WFD100W)". It is designed as a single piece extension tray for the somewhat larger Westinghouse WFD101W model dehydrator and intended for printing on larger format printers with print beds greater than 300 x 300 mm (e.g. XL printer). The remix has also been designed with a sloping internal wall to aid in printing the model with minimal supports. (This model is similar to Andreq's model remix for the WFD101W, but with some minor design differences.)
As with the original model, three different size tray extensions (i.e. STLs) are provided. An 88 mm high tray, a 73 mm high tray, and a smaller 30 mm "spacer" tray. Hopefully these sizes, used singularly or in combination, should be enough to hold different spools of various widths. A 3MF file is also included for printing specifically on the Prusa XL printer.
Recommend printing at 0.20mm SPEED setting using at least 10% infill. Print the model upside down and enable supports for the inside "locking tabs". This should be the only support you'll need. Depending on your printer you may also need to add a brim or "helper disks" to improve bed adhesion and prevent warping. (See the 3MF file in PrusaSlicer for more details.)
Happy printing!