Universal Broom/Mop/Pole Holder - Proslat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount and organize your poles onto your proslat system!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
REQUIRES USE OF UNIVERSAL PROSLAT MOUNTING PANEL NUT - REVIEW INFORMATION BELOW.
Unsatisfied with the limitation of proslat mounting hooks and individuals costs, I retrofitted an existing mount I had to integrate into the proslat system.
Instructions:
Remove the metal mounting plate from the holder. There will be two #6 screws on the rear that attach the holder to the mounting plate. DO NOT DISCARD THESE SCREWS - THEY WILL BE REUSED. Do not remove the center #6 screw.
Reattach the holder to the adapter plate using the same #6 screws previously removed.
Install the 2x universal single mounting panel nut into the desired slot of the slatwall
Mount the adapter plate to the panel nuts using the fasteners specified below.
Materials:
Universal proslat single mounting panel nut (qty 2 per holder: https://www.printables.com/model/1544101-universal-proslat-mounting-panel-nut
Mounting Organizers: https://a.co/d/8swl5KU
Fasteners: M3 x 6 mm countersink (qty 2 per holder)
Adapter Plate - see STL files. There are three mounting options: single, duo, quad. Adapter allows multiple mounts on same adapter plate. I would recommend the single in almost every scenario.