1 / 27
Tachikoma タチコマ GITS SAC 2nd GIG version — zdjęcie 1
1 / 27

Tachikoma タチコマ GITS SAC 2nd GIG version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ghost in The Shell Tachikoma (GITS SAC 2nd GIG variant) model, with lots of extras.

Ocena
4 / 5
Polubienia
24
Wydruki
1
Wyświetlenia
401
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Ghost in The Shell Tachikoma (GITS SAC 2nd GIG variant) model designed for 3d printing. Design is focused on accuracy to original Ghost in the Shell Artwork and practicality of printing.

Ball joint articulated hips, knees, eyes, shoulder, elbow, claw, feet, model is also fully scalable on plate.

Created with Solid modelling, .3mf .stl and .step formats provided

Model files include extras: Tachikoma leg with wheel, Tachikoma leg with stripes (makes painting easier), Tachikoma Leg with Wheels and Stripes, Tachikoma Mini-Gun, Tachikoma Chainsaw (for landscape gardener variant), Tachikoma Fan, Various books, alternate left claw, upper leg articulation with armour attached, Tachikoma Power Pack Body, multiple posed claws.

Model can be finished in multiple ways: raw 3d print material, multicolour 3d printing, print is raw material colour then paint details, fully painted (no so good if you want to move joint positions after painting)

Some Build tips:
I used sanding then a gloss top coat in my example models, which gave a nice shine.

Printing the claws can be tricky, I would recommend always printing separately.

If ball joints are too tight to pop together, then sand outer edge of female, if too tight to rotate but in position then sand/polish male (if a joint is tight, you can often move it around gently until it loosens up), if ball is too loose in socket apply some spray on top coat/varnish to inside female section.

Tagi