Insert for Doze geiger counter tin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for the tin that the Doze micro geiger counter came in
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
My Doze geiger counter came in a nice tin that I wanted to use but it didn't have an insert.
It's a straight forward print, 4mm nozzle, 0.2mm default should work nicely. In my case the insert is a perfect fit but obviously different printers might need a bit of tweaking to the scale.
There are 2 slots on the bottom for two 10mm x 10mm x 4mm magnets. These are a bit tight. I only have one magnet in the one slot but a better solution is probably just a piece of double sided tape at the bottom. The magnets are VERY optional.
If I had any glow in the dark filament I would have used that!