Insert for Doze geiger counter tin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert for the tin that the Doze micro geiger counter came in
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
My Doze geiger counter came in a nice tin that I wanted to use but it didn't have an insert.
It's a straight forward print, 4mm nozzle, 0.2mm default should work nicely. In my case the insert is a perfect fit but obviously different printers might need a bit of tweaking to the scale.
There are 2 slots on the bottom for two 10mm x 10mm x 4mm magnets. These are a bit tight. I only have one magnet in the one slot but a better solution is probably just a piece of double sided tape at the bottom. The magnets are VERY optional.
If I had any glow in the dark filament I would have used that!