Spinning Dice 3in1 (d6, d8, d20) / fidget dice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handheld fidgety spinning dice to play around
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Always have a die with you—without even needing a surface to roll it on. Roll it while walking, in the car, or even while doing a barrel roll in your aircraft.
This handheld spinning die is great fun to fidget with and play around. It integrates three different dice in one design:
d6 (side 1)
d8 (side 2)
d20 (around the outer ring)
With a bit of math, it can also be used as a d2, d3, d4, and d10.
The d20 numbers can be difficult to read at this size, especially when printed on FDM/filament printers. If you have access to a resin printer, you’ll get much better detail. Otherwise, you can print "Outer_disc_wo_d20", which has no d20 numbers imprinted.
The center piece has three small marks, so you don’t have to worry about orientation when picking it up. When holding it between thumb and index finger (and spinning it with your middle finger), one of the marks will almost always end up on top, making it easy to identify the rolled result.
Needs a ball bearing as only additional part, installation is easy, just push the bearing into the outer disc part.
At the moment, only a dotted version is available. I may add a numbered version later if there’s enough interest. The dotted version is very easy to print on most printers and remains clearly readable even at small sizes.