CORE One Advanced Filtration Exhaust Vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic exhaust vent for Prusa CORE One Advanced Filtration system. Models are available for a variety of hose sizes.
- Ocena
- 4,9 / 5
- Polubienia
- 88
- Pobrania
- 222
- Wydruki
- 9
- Wyświetlenia
- 1811
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a magnetic mount for attaching a vent hose to the Prusa CORE One Advanced Filtration System. It fits snugly and is held securely with 10mm x 3mm magnets but it is easily detachable.
Models are currently available for the following hose sizes. I might be able to do other sizes on request.
2-1/2 inch (63mm),
3 inch (75mm and 80mm versions) or
4 inch (100mm)
RECTANGULAR 39mm x 83mm (1.5" x 3.25") There is a 0.2 degree taper on the outside.
This attachment makes it easy to vent air from your advanced filtration system outdoors. (Yes, I even want the filtered air outside.) I felt I at least need a backup option for that time between when the carbon filter needs to be replaced and when I actually do it. I suppose this could be used in lieu of the filter cartridge if it is vented outdoors but that wouldn't necessarily be my first recommendation.
PRINTING: I printed mine using a 0.4mm nozzle at 0.2mm layer height with 3 perimeters and 15% infill. It seems to be sturdy enough. Use the default orientation of the stl. I used supports and a brim for my print and am happy with the result.