Ender 3 Series Thumper/Orbiter Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount to put a Thumper/Orbiter extruder on an Ender series printer. It works well with my Mantis toolhead mod.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Any feedback would be great! I will attempt to address any design issues as I am informed of them.
The parts (Assuming they exported and import correctly) are designed to be printed as-is with the largest flat surface of each object laying flat against the builtplate. I would highly recommend printing atleast the base in something with a higher deformation temperature, such as PETG or ABS; the rest should be fine to be in PLA.
There are a few photos with highlighted circles, which represent the holes that require M3 heatset inserts. There should be 5 in total for the mount itself, 7 including the BLTouch mount (Currently only for the Ender3v2). The countersunk screws for the backing plate (Blue in the pictures) are the M3x10 screws re-used from the Thumper extruder.
The Thumper extruder is a pretty good direct drive extruder made by Causality Manufacturing (https://www.causalitymfg.com/downloads/thumper2). I've been using it for ~1 year as of writing, and it has served me great! I daily print ~250mm/s @ 15k mm/s^2 accelerations on my Ender 3 v2, though I would get a high quality motor for those speeds (I cheaped out and you can hear it).
This project was created with OnShape! https://cad.onshape.com/documents/a7058376d6912d7f08a0fd23/w/14029fc8e3aaa6501c9d4c70/e/ea93b852bfa66cdb93248839?renderMode=0&uiState=695d2a20e176c750b2e99711