Meanwell SP-240-12 Bracket for Wanhao i3 / Monoprice Maker Select V2 Control Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The second design I've made, but this one for the 240w version. The 350 is found here:…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The second design I've made, but this one for the 240w version. The 350 is found here: http://www.thingiverse.com/thing:2010282
You will need: This Bracket The 4 original M3 8mm cap bolts used to affix the ugly original old power supply 4 M3 5mm cap bolts (purchase or find)
I have designed it to move the SP-240 power supply into the control box by 5mm so that a 25mm fan can be easily used on the back plate and not pushed up against the power supply. Was designed to work with this back plate: http://www.thingiverse.com/thing:1472100
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Infill:
75%
Notes:
It is designed to use m3 cap bolts to screw directly into the bracket to mount it to the bottom plate. I have spec'd the holes to be 2.9mm in diameter to be snug.
First, use 5mm M3 Cap bolts to screw this bracket into the Meanwell SP-240, then bolt the bracket to the bottom plate.
Category: 3D Printer Accessories
