Meanwell SP-240-12 Bracket for Wanhao i3 / Monoprice Maker Select V2 Control Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The second design I've made, but this one for the 240w version. The 350 is found here:…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The second design I've made, but this one for the 240w version. The 350 is found here: http://www.thingiverse.com/thing:2010282
You will need: This Bracket The 4 original M3 8mm cap bolts used to affix the ugly original old power supply 4 M3 5mm cap bolts (purchase or find)
I have designed it to move the SP-240 power supply into the control box by 5mm so that a 25mm fan can be easily used on the back plate and not pushed up against the power supply. Was designed to work with this back plate: http://www.thingiverse.com/thing:1472100
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Infill:
75%
Notes:
It is designed to use m3 cap bolts to screw directly into the bracket to mount it to the bottom plate. I have spec'd the holes to be 2.9mm in diameter to be snug.
First, use 5mm M3 Cap bolts to screw this bracket into the Meanwell SP-240, then bolt the bracket to the bottom plate.
Category: 3D Printer Accessories
