1 / 1
Meanwell NES-350-12 Bracket for Wanhao i3 / Monoprice Maker Select V2 Control Box — zdjęcie 1

Meanwell NES-350-12 Bracket for Wanhao i3 / Monoprice Maker Select V2 Control Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

After 2 failed power supplies, I am considering purchasing the Meanwell NES-350-12 for the control box.I have also…

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

After 2 failed power supplies, I am considering purchasing the Meanwell NES-350-12 for the control box.

I have also made the 240w version, found here: http://www.thingiverse.com/thing:2020651

You will need: This Bracket The 4 original M3 8mm cap bolts used to affix the ugly original old power supply 4 M3 5mm cap bolts (purchase or find)

I have designed it to move the NES-350 power supply into the control box by 5mm so that a 25mm fan can be easily used on the back plate and not pushed up against the power supply. Was designed to work with this back plate: http://www.thingiverse.com/thing:1472100

Thanks, Jae

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 V2

Rafts:

No

Supports:

No

Infill:

75


Notes:

It is designed to use m3 cap bolts to screw directly into the bracket to mount it to the bottom plate. I have spec'd the holes to be 2.9mm in diameter to be snug.

First, use 5mm M3 Cap bolts to screw this bracket into the Meanwell NES-350, then bolt the bracket to the bottom plate.

Category: 3D Printer Accessories

Tagi