Meanwell NES-350-12 Bracket for Wanhao i3 / Monoprice Maker Select V2 Control Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After 2 failed power supplies, I am considering purchasing the Meanwell NES-350-12 for the control box.I have also…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
After 2 failed power supplies, I am considering purchasing the Meanwell NES-350-12 for the control box.
I have also made the 240w version, found here: http://www.thingiverse.com/thing:2020651
You will need: This Bracket The 4 original M3 8mm cap bolts used to affix the ugly original old power supply 4 M3 5mm cap bolts (purchase or find)
I have designed it to move the NES-350 power supply into the control box by 5mm so that a 25mm fan can be easily used on the back plate and not pushed up against the power supply. Was designed to work with this back plate: http://www.thingiverse.com/thing:1472100
Thanks, Jae
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Infill:
75
Notes:
It is designed to use m3 cap bolts to screw directly into the bracket to mount it to the bottom plate. I have spec'd the holes to be 2.9mm in diameter to be snug.
First, use 5mm M3 Cap bolts to screw this bracket into the Meanwell NES-350, then bolt the bracket to the bottom plate.
Category: 3D Printer Accessories
