1 / 2
Core One Snap Rivet Remover Remix For 8 x 2 mm Magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to use two 8 x 2 mm magnets.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 4
- Wyświetlenia
- 188
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (14)Powiązane
Remix of Magmabow's Core One Snap Rivet Remover model to hold two 8 x 2 mm magnets.
As per the original model, print with PETG at the lowest layer height you can with your nozzle. Pause the print mid-way to allow the insertion of two 8 mm (wide) x 2 mm (high) magnets - i.e., one at both ends.
3MF file included for the Prusa MK4S printer (uses 0.15 mm layer height with a pause at layer 3.05 mm for insertion of magnets).
Happy printing!!