Heinkel Tourist 103A2 Rear light - Inner white lens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My lens was broken so I recreated it and printed it in transparent PETG. Most likely not legal but does the job.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The white tail light lens and lamp holder for my Heinkel Tourist 103A2 was broken so I designed this model and printed it in transparent PETG. See elsewhere on how to print transparent PETG but the most important is to print it very slowly, solid (no infill) and as large a nozzle as possible (I used 0.4 mm).
I did not recreate the perfect Fresnel lens but I can't see the difference. I glued mine to the tail light using lots of hot glue (it's holding for now).
Could be upgraded to use holders for LEDs.
