1 / 3
Design paper towel dispenser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stylish paper towel dispenser with adhesive feet. The print is made of PLA and requires no supports.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Consider running two different prints to change the filament. The dispenser looks better in two colors. Maximum size of the paper towel “hole”: 36mm. Maximum thickness of the paper layer: 40mm.
If you want, you can add sand to the dispenser halfway through printing to add weight so that you can take a sheet of paper towel with one hand.