Funwheel X7 &X10 Railguards/protectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Railguards for your X7 or X10, to keep your rails more intact than mine ; ).
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 692
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldnt find any rail guards that I liked so I designed my own.
I printed them on the surface facing the rail. they will require support, as I matched the underside of the protector to the profile of the rail.
I printed them out of 95A TPU (make sure to dry well for easier removal of support and less bubbles)
I used 0.2 layerheight, 4 walls, 7 top layers, 4 bottom layers 15%gyroid. Might be overkill, as they feel really stiff already.
Mounted to the board using doublesided carpet tape. Cut off a piece big enough for the whole protector to fit on. Stick the protector on the sticky side. take a cutting board and cut off the excess tape with a box cutter/scalpel. Remove the film from the other side. Then you are ready to line up the Protector to the rails. They should follow the tip of your rails nearly perfect.
Now includes inlays for the X7 and X10 logo's
If you want to rearrange the bodies in your slicer or dont want to print them all at once: Right click any of the objects, and select "split">"to objects"
EDIT: not happy with middle protectors, so i designed some new versions