Liczymy pasujące modele…
Collection of mud flaps for the front and back of the 3DSets Landy. Overview Logo 4x4 Mountain. LandR. Logo. **** Printed with PLA and 0.25 nozzle, color change at 0.65.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
Bolt on replacement blade guards for the Luba What are the benefits of this design over the original stock part? Stops grass pancakes getting stuck on top of the guard causing causing issues with lift motors retracting Makes cleaning a…
This is a remix: https://www.thingiverse.com/thing:4394842 Mud guard for the front and back of the 3DSets Landy. Logo land rover
Lightswitch Guards to block out kids or pesky visitors from turning on/off switches you don't want changed. Have a completely closed and semi open version. To flip switch on open version requires a pinch on the switch that is somewhat…
Model Notice! The carbon fiber pattern that you see in the pictures is not of the design, the original design is smooth. The band is the one that marks this pattern. Front and rear mudguards for 26", 27.5" and 29" mtb Two designs to…
Prop guards for the Tiny Trainer that do not require extra modification or removal of props/motors to install. They fit onto the ends of the arms by friction fit and a zip tie (not necessary but suggested if racing). The model is designed…
Attention! If you have a 12" tire, this is not the model you are looking for! For 12" tires like the Thundercat check out my new design: https://www.printables.com/model/1345564-floatwheel-adv-btg-mudguard-and-mini-fender-for-1 Original…
The part has an original design and was designed directly on the ADV Standard CAD model provided by Tony from Floatwheel. It's similar to the original Design by Tony, but optimized for 3d printing, the external surface is completely flat.…
Description These parts part have an original design and were designed directly on the ADV PRO CAD model provided by Tony from Floatwheel. It's a completely different design from the original Design by Tony fro the ADV Pro (wich are…
Flip two of the mids.stl files on their X axis for the other side. Add an o-ring to the power plug cover for grip. I print in PETG with a textured print bed. TPU for the plug of course.
These parts have an original design and were designed directly on the ADV Standard CAD model provided by Tony from Floatwheel. It's similar to the original Design by Tony, but optimized for 3d printing, the external surface is completely…
Prevents your bed leveling wheels from being moved out of position unintentionally when you bump them while still allowing access when you do want to adjust them by reaching under the shields. Slide-on version just snaps around your bed…
This is a custom side guard designed specifically for the TBS Source One V5 FPV drone frame. On this frame, the ESC and flight controller stack are quite exposed, which often leads to dirt, grass, and debris buildup—making cleaning…
I didn't see a rail guard option for the Pro model so I decided to try to make one. This is my first 3D model so it is certainly not perfect but I think its functional for some protection and to change the appearance to look more the like…
I got the Viswhoop, as the price for the complete copter was only a bit more expensive than the Caddx Vista itself. As expected for this price point, the frame and the hardware is somewhere between mediocre and "okayish". With this kit…
Fits with flight fins and thundercat
The Story This is a memorial for a work friend's evolve GTR all terrain skateboard. These skateboards look seriously cool ( https://www.rideevolve.com.au ). I don't have the talent or balance to ride one but he does. We spent some time…
Gatehunter X Arm Guards :P Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 1000 Filament: no name TPU Black Category: R/C Vehicles
Based on the ADV PRO model provided by Tony from Floatwheel. This print is designed to be easy and hassle-free: ✅ No supports required - prints cleanly on most printers 🔩 Assembly with M3 × 5 mm screws recommended for a secure fit (parts…
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
Parameters: Printer used: Prusa MK3s Filament: PLA+ I have printed these parts with a single extruder. Imade stops to change the filament in the first 3 layers (0,2mm each). If you need a help to print in 2 color: here you have a…
Remix model from m_a_CAR Versions for 6.5, 7, 7.5, 8, 9, 10mm guards. Printed with PLA due to layer adhesion issues with my PETG Filament. So I designed versions with easier layer adhesion by adding a 0.25mm layer. However the model…
The goal of this design is to protect the suspension linkage bearings from mud, grit, water etc. which reduces their life and keep the bike a little cleaner. The guards are printed in PETG, and held on with cable ties, I prepared for 6…
IMPORTANT UPDATE: DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions. Handguards for the…
AAC Keyguards for iPads The purpose of this collection is to deposit all keyguards I have designed for different AAC apps on various iPads while also providing the files I use with Fusion to create keyguards. New keyguards will be added…
Civic Type R (FL5) Fender Vent Guards The FL5 iteration of the Civic Type R introduced open vents to the front fenders. However, these vents are large enough to allow road debris to pass through, potentially damaging the side panels.…
Model má trochu jiné rozměry oproti původnímu, kvůli dodržení stejných vlastností jako původní ze střikolisu, ale pasuje bez problémů s použitím původních štoubů. Materiál: Lipstick Red Prusament PETG Výška vrstvy 0,15 mm Tryska: 0,4 mm…
Tired of small rodents sitting on the engine, eating there, and leaving nut shells and droppings? I'm trying these to keep rodents off the engine. I'll probably make one for the flat area of the swingarm too. Two colors in the photos…
Complete Onewheel TFL compatible drop top fender for funwheel X7 (or onewheel XR). The top fender didn't actually fit on my Bambu lab P2S. I printed it on its side on supports and used Bambu Studio to cut the ends off. It won't harm…
slider/ bolt sleeve for the Tenere 700 stock handguards. I kept scratching the walls with the bolts while loading & unloading the bike so I made these to protect the bolts. I've lost one of the spacers, so I designed a replacement for…
The Citadel of Vanguards Armada logo/badge. Printed on my Centauri Carbo in dual color PLA silk or with PLA pro and turns out great, done with Normal support/default and it comes off easily, and looks gorgeous with very little clean up…
Took @Zelas_422011 's great design and reduced the weight by booling
Hey! These are my homemade splash guards (mud flaps) for the door sills of the Jaecoo J7. You know how after rain or on a dirty road, all the spray gets thrown right onto the door sills and lower panels? My J7 suffered from this…
I printed mine with TPU with four wall sides top and bottom at 80% gyroid infill. Stiffens up the entire nerf bar and will last forever.
Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag
This model is very small, if you want it in very good quality it is recommended to enlarge the scale. It is recommended to use support This is the first prototype soldier model, in the future, we plan to create various units, as well as…
Mudguards Mudguards for the Floatwheel ADV/Pro with BTG tire. I haven't tested them on ADV2 (it has different motor plug) but it should fit coz apparently ADV1 has chunkier motor plug anyway (but better check). Can fit Onewheel Threaded…
I resized this model by mloska to fit my chairs - to prevent my robot vacuum cleaner from getting stuck on the horizontal part of legs.
Our kitchen drawers and handles have sharp right-angle edges and collide with the glass kitchen door—a dangerous situation with a small child. These handle covers protect both the child and the door.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
Governor Generals Horse Guards Cap Badge No supports Resizable It has to be printed on some sort of base/floor, otherwise the letters fall out. If someone can figure out how to add a full (inner only) Brim at 1.5-2.0 mm, please let me know.
First off - MZ4250 is amazing and a gift to an unfathomable amount of TTRPG tables. Who else can claim that they make 1000s of free, high quality tabletop minis every year? If you like MZs models and or this remix (only possible because…
FTX Zorro Carnage & Bugsta RC Car Rear Mudguards Fits part number FTX6321 I print in TPU95A Flexi, but you could use PLA+ or PETG. I printed these for my FTX Zorro Brushless but the FTX site advises FTX6321 also fits the Carnage and…
These are made from a 3d scan of a africa twin handguards modified and scaled down to fit the honda monkey. spacers included to be used with the standard bar ends, recomended to use 15% infill adaptive layer height support enabled with…
Motor wire protection for iFlight AOS 3.5 FPV quad frame. I printed in TPU but should also work in harder filaments, there's a small ridge for holding it in roughly the right position.
Just another set of mud guards for mountain bikes. The front ones should fit a Fox 36 fork and the rear has been somewhat designed to fit on a 2019 Pivot Trail 429 but could easily be modified to fit on other frames. Print in PETG with…
Simple stick on protectors to avoid scuffing from boots on an ADV 350 scooter Prints in TPU, out (chamfered edge) surface on base plate. No supports. Sticks on using 0.5mm double-sided adhesive foam sheet cut to size. Costs pennies, saves…
As this is a remix, i only add my experiences/settings here. During issues when removing the custom support block like in the original from Adam, i used the automatic support generation, with Style: Grid, Top contact Z distance: 0.15 mm,…
I designed these mud guards for a Traxxas Slash 2wd High center of gravity chassis to keep the dirt out of the chassis. It uses the holes from the nerf bars so you will need 4 screws that are a bit longer to replace the ones from the nerf…
These parts have an original design and were designed directly on the ADV Standard CAD model provided by Tony from Floatwheel. It's similar to the original Design by Tony, but optimized for 3d printing, the external surface is completely…
Description These parts part have an original design and were designed directly on the ADV PRO CAD model provided by Tony from Floatwheel. It's a completely different design from the original Design by Tony fro the ADV Pro (wich are…
M-Lok handguards in 4.5in and 9in lengths. Shown on a Midwest Industries 12.625in 308 rail. Printed using matte PLA and 0.08mm layer height. I haven't yet run these through their paces, so it could be that a more robust/higher-temperature…
I love my PetSafe Healthy Pet Water Station but my 2 spaniels always had dripping wet ears due to the bowls width. These guards allow the dogs to drink while keeping their ears dry. I've included the Fusion360 model so that you can adjust…
This model is compatible with the lego system.
One pack of assorted wires I purchased came on 48x35 (diameter x width) spools. So I designed a guard for those which fits perfectly. Other packs of wires I purchased were unspooled, so I designed a 55x40 spool to fit those. You can find…
I designed these guards that are easy to print and simply clicks into place. They prevent anything in the side mounted boxes on the MK4 from getting into the path of the moving bed. Had Magigoo fly a few times… Hope it helps someone!…
This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…
Fan guard for 30mm & 40mm fans styled after the vent and panel patterns of the Empire in Star Wars.
This is a set of larger hair clipper guards for these “unbranded” hair clippers on Amazon: https://www.amazon.co.uk/dp/B01MS56HXV. The manufacturer info says Toulifly so I'll use that as the brand, but I'm not 100% sure. Anyway this only…
I installed HDB handguards on my 2019 690, and it caused interference between the front brake lines and where my speedo was mounted on the Lynx fairing dash. The first part is a bracket (print x2) that bolts onto the HDB handguard bar…
A simple box/stand to hold 10 clipper guards (designed for 1.5 - 25mm guards) Internal width is 52mm Smallest slot is 10mm, largest is 34mm.
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
Onefinity Chip Rail Guards @ MKE Gadgets #192 One at newest addition to my shop is my Onefinity CNC router. The best part of a new tool in the shop is accessorize it. And that’s what today’s video is about, as a router bit spins and…
A super simple print for putting a tiny wall around the Z belt openings on a Voron 2.4 or Troodon 2 Pro style printer. Print 4 of them. They block bits and bobs from falling into the pulley hole. You can glue them, or you can leave them…
Includes 2 models: Shorter closed splash guard Taller opened splash guard Created a splash guard for the cheap tiny red and gold egg style mini pottery wheel. It works perfectly, but still splashed a little to the front, so I created a…
Thick Frame guards for 2003 rm125 you need to drill a hole for the subframe bolt and zip tie it to the frame
x8 covers have clips to secure it to frame, quarter covers youll need 3m double-sided stick on like 3M 9448A sheets or similar
TPU Propguards for Pavo20 with PETG inserts for more stability, but still bouncy and resistant. this is a modification of this Pavo20-replica whoop duct https://makerworld.com/de/models/53282?from=search#profileId-57500 PETG survived some…
Parameters: Printer used: Prusa MK3s Filament: PLA+ I have printed these parts with a single extruder. Imade stops to change the filament in the first 3 layers (0,2mm each). If you need a help to print in 2 color: here you have a…
These were designed to fit the PRSB401R Kit towers Parts should be printed solid in TPU for best results. The guard mounts using zip ties.
I'm not confident with Slicers other than Cura, but loved RedWish's design, so I remade it to have the hexagonal mesh pre-made and ready to slice in Cura, no extra steps needed.
V5 of the Gimbal Guard is the one you should be printing, I've uploaded the other versions to show the iterative process I went through. V1 worked, but was terrible to remove, and was mainly to confirm my measurements. V2 was nice to…
Arm guards and landing gear/skids for the AOS Falcon 7. Can be used separately or together. Added lading gears for the rear arms Category: R/C Vehicles
This is just the face guards left out on the previous upload. Hopefully it works for everyone who wants to complete their Helm of Yngol! You may have to add supports to the print, as if you have a bambu labs a1 or something similar that…
As standard approximately fits 18mm straps. Print at 125% scale in Z for 22mm straps.
Fits perfectly with the oem screw with no problems! 0.2mm layer 50% grid infill Printed with PLA+ Tree support for cleaner hole Print with hole on top + You need to print 2x the normal file, + 2x mirrored. +
I had tried several other solutions for this, but decided in the end to make my own. These clip on just tight enough that you can pick up and move your chair without fear of the guards moving. There are two sizes, one for the side pieces,…
Holder for guards, during the action transfer location guards usually fall and lose their state (broken) Made holders for more convenient transfer location. In a set of 4 for special locations and 5 locations for ordinary, as well as ipt…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/dh9lcU7t25A Added holes so that I could screw this into a table top. Added edge protection. Category: 3D Printing
Slightly modified version of @Alex_Larie's Traxxas Slash Mud Guards.
I made this ice skating guards to protect the blade being damaged or damage my bag. It fits perfectly my 44 EU size ice skates and also smaller sizes. You can download the model and shrink or expand in length if necessary.
Mudguards for the Arrma Mojave 6S V2 / EXB. Two versions: One pair with "Mojave" print and some blank ones. Works with Scorched RC Fenders. Print in TPU, use M3x6 or M3x8 to attach them. Send it! Print Settings Printer Brand: Creality…
The following is a remix of CarbonRain's Grand Lotus Gimbal Protector found here: https://www.thingiverse.com/thing:2782210 When I tried printing the original, the hole for the Grand Lotus thumb pad was too small and it couldn't slide…
GepRC Mark5 Arm Guards copied as close as possible to the originals. Holes are arranged to fit a 16mm motor installation size and 8mm motor mount screws. I added a new version with side covers.
I created these early on for two reasons; cleaning out filament debris from the small cavity surrounding the leadscrew rotation area at the bottom of the printer was tedious. As well if any instance of filament strands or dirt getting…
Could not affix the front Mudguard to my fork with the included Hardware, so I made one thats a bit longer. Strut/Brace Diameter of 2.4mm, which is clamped with a M4 Bolt & Nut. Printed at a diagonal in Prusament PETG for better…
Printing I was able to print these without supports, however your results may vary. I printed mine in PLA at 0.16mm layer height. Happy printing!
This is a design I came up with to solve a problem on my 7 inch Long Range Drone build. I had to stick the high powered VTX on the bottom of the frame, so I needed to lift up the quad in order to give the VTX clearance. I call it the…
A printable tie-breaker coin, offered in 2 flavors: a single model, or a 2-part model that you glue together. The latter is for if you don't want to worry about overhangs or printing at an angle with supports. If printing with AMS, you…
print everything twice and mirron on X axis, splash guards are ideal from 88A shore TPU or similar you need 4x M3x10 and 4x M2x8
When you have splash guards from TPU, they are better with washers. Fits 3Dsets Landy and Landy Wagon. For wagon use the spacer piece, it looks more relastic, its closer to the wheel and not directly at the end of the car. Mirror for…
Generally completed, but I need to update/fix some of the components. I improved as I went, which means the 1-star and some of the newest characters could be. updated to align with improvements incorporated later. It works well enough for…
Simple dust guards for the back of your Jonsbo TK-1 case. Holes should align quite well for use with original screws. HDD-area cover might need longer screws however. Model for the larger hole is thin enough that you can still get some…
Press fit propeller guards for DJI Mini 3 Drone No extra material required Easily mount/dismount onto the motor case No sensor interference Print Settings Printer Brand: Sovol 3D Printer: Sovol SV06 **Supports:** No Resolution: variable…
🦑🔺 Squid Game Guards – Zápichy do dortů (Squid Game Guards Cake Toppers) 🎂✨ Tento 3D tisknutelný zápich do dortu přináší tajemné strážce ze seriálového fenoménu Squid Game ! Maskovaní dohlížitelé s geometrickými symboly na helmách…
These propguards are specifically designed for the HGLRC Drashark 1.6-inch quadcopter to protect your propellers and motors from impacts and damage. They provide excellent stability and durability without significantly adding weight to…
This is an insert for the phenomenal game, Guards of Atlantis II. It's not the most compact design, but that's not really what I'm going for here. This insert aims to do one thing: get the game out from the boxes and onto the table as…
