Five33 Tiny Trainer Prop Guards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple version of prop guards for the Tiny Trainer
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 1033
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Prop guards for the Tiny Trainer that do not require extra modification or removal of props/motors to install. They fit onto the ends of the arms by friction fit and a zip tie (not necessary but suggested if racing). The model is designed to be printed with these settings but are not required for a great print:
- 1.5mm TPU
- 0.6 Nozzle
- 0.3 Layer Height
- 0.65 Extrusion Width
- Supports needed for 90deg overhangs and bridges only
Versions are available for the standard 2mm bottom plate, upgraded 3mm bottom plate, and v2 Tiny Trainer with replaceable arms.
-LED Version fits 5mm and 8mm COB LED strips. Around 22g per side without LED strip.
-Standard Version is without the slot for LED strip. Around 24g per side.
-Lite Version is a single arm prop guard with minimal material. Around 8g per arm.