1 / 2
Mark 4 "Stiletto" Motor Guards + Landing Gear (Remix by PKL) — zdjęcie 1
1 / 2

Mark 4 "Stiletto" Motor Guards + Landing Gear (Remix by PKL)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lightweight, double purpose landing gear and motor protectors made to fit an 7 inch Mark 4-V2 FPV Quadcopter frame.

Ocena
0 / 5
Polubienia
4
Pobrania
119
Wydruki
0
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

As this is a remix, i only add my experiences/settings here.

During issues when removing the custom support block like in the original from Adam, i used the automatic support generation, with Style: Grid, Top contact Z distance: 0.15 mm, Pattern: Rectilinear and Top interface layers: 0. The top interface layer=0 did the trick for me to easy remove the support.

Printed with: TPU Filaflex 82A, 15% infill, 3 Perimeters,  5 Top and 4 Bottom Layers.

As i'm not a good pilot i added some cable ties around to prevent strip off during the multiple touch-downs. You might also cut out the lip a little bit in the area of the motor mount.

Hope the fusion-model with the added parameters helps to adapt and modify this to your needs.-)

Tagi