Mark 4 "Stiletto" Motor Guards + Landing Gear (Remix by PKL)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightweight, double purpose landing gear and motor protectors made to fit an 7 inch Mark 4-V2 FPV Quadcopter frame.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 116
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
As this is a remix, i only add my experiences/settings here.
During issues when removing the custom support block like in the original from Adam, i used the automatic support generation, with Style: Grid, Top contact Z distance: 0.15 mm, Pattern: Rectilinear and Top interface layers: 0. The top interface layer=0 did the trick for me to easy remove the support.
Printed with: TPU Filaflex 82A, 15% infill, 3 Perimeters, 5 Top and 4 Bottom Layers.
As i'm not a good pilot i added some cable ties around to prevent strip off during the multiple touch-downs. You might also cut out the lip a little bit in the area of the motor mount.
Hope the fusion-model with the added parameters helps to adapt and modify this to your needs.-)