Counting matching models…
Parts for my 5 Inch quadrocopter build. The parts are for a clone of the GEPRC Mark4 frame: https://www.banggood.com/custlink/KvvEZ5HHEp Some of the parts should fit to the original frame, too but at least the front bumper won't fit…
Gopro mount on FPV dron. Tested on Gopro 9 black.
Introducing my meticulously designed 3D model holster crafted specifically for the Ruger Mark 4 22/45 Tactical with a 4.4" barrel . Precision-engineered, the holster is molded to perfectly fit the contours of the Ruger Mark 4 22/45…
Cover to protect electronics from dust and wet. I can make designs for other models too. As i can see in this model difference only in arms length (5-10in) 🚨 Looking for a stronger version or have wider frame arms? Check out my updated…
Cover del frame Mark4 de GEPRC, para protección FPV frente a golpes y material, con entradas de aire y muy aerodinámico, se ajusta perfectamente a la forma del frame, ideal para usar con el soporte gps, también en mi perfil.
Print without supports XT60 connector must be glued for convenient usage May be it fits also 7, 9 and 10 inch variants. Bonus: wires protection. Must be printed in vertical orientation. Alternative version for slightly smaller dimensions…
Hope you enjoy! Will be building myself soon!
Camera mount - print in PETG. Antenna mount - print in hard TPU (70 D or harder) and use cable ties to fix antennas in place. Supported camera ange is from 0 to 30 degress (the mount is slightly in frame at 0 degrees). When printing…
This mount is suitable for 19mm cameras with two screws on one side. I created it especially for walksnail cameras that you want to mount on Geprc mark4 I used Prusament red PLA, but you can use some flexible material instead ;) I also…
A servo-based release/drop/tow mechanism. Mounts to bottom plate of GEPRC Mark4 (https://geprc.com/product/gep-mark4-frame/) Centered weight, middle of frame, directly under the FC Symmetrical mount options, can be attached in both…
Standoff dia: 6.15mm vtx hole dia: 6.5mm height: 24mm
This is a dual-antenna, GPS and 2.4GHz elrs antenna mount designed for the 7/8/9/10inch Mark4 V2 frame. Antenna used: Foxeer Lollipop V4 Gps used: HGLRC M100, It may also be compatible with other GPS modules. The mount is ideal for…
Update: Got a top side that includes the ability to mount SMA pigtail. For this version you print 2 bottom's to secure the ELRS antenna. Printed with Esun TPU 95A. Printed with a 0.6mm nozzle.
TPU, Flex, Elastan wall 3 Infill 20% gyroid Support Yes
First version was very lightweight, also easy to install. This version more strong and more crush ready. Also some different design v002 and v003 difference only arms holes, v003 much wider to fits more arms variations. This is an…
Mein erster Versuch einen Walksnail/ELRS Antennen Mount für einen GepRC Mark4 Frame zu konstruieren. My first attempt at constructing a Walksnail/ELRS antenna mount for an GepRC Mark4 frame. Print Settings Printer Brand: Creality Printer:…
This is a single-axis servo gimbal designed for the 7/8/9/10inch Mark4 V2 frame. It allows you to tilt your FPV camera up or down and can also provide stabilization during flight. The build uses an ES08MDII servo, though other similar…
Arm protector for GEPRC Mark4 10 inch frame
GEPRC Mark4 Antenna holder VTX, RX, SMA Uses original Hardware
Even if a GEPRC Mark 4 HD isn't a long range quad, a GPS may come in handy. Either as a fail safe or as a speedmeter. I couldn't find a mount for the front of the quad so I made one from scratch. There are two designs. One for the factory…
Geprc Mark4 ELRS Reciever Holder
Layer Height: 0.15 Wall loops: 3 Infill: 25% Cross Hatch Support: Tree (manual)
Adjusted dimensions to better find my generic XT60 plugs. Category: R/C Vehicles
This is a GoPro mount for a Mark4 V2 10" but may fit other models
It's just an isolator plate to prevent stack from contacting a carbon frame.
Protective side plates for the GEPRC/Clone Mark4 5 inch quadcopter frame. Comes in two different sizes to accommodate ESC wiring, blank side and USB port versions, and versions that have extra room at the rear to accommodate wiring…
Cushioned TPU feet for the GEPRC/Clone Mark4 5 inch quadcopter frame. Comes in a variety of sizes and can be slipped on and holds itself in place, but I recommend using a small ziptie to prevent it from getting knocked off during crashes.…
this is gps mount for mark4 frame. good luck ender3 Supports: NO Resolution: 0.12 tpu 95A speed: 25mm/s wall: 35mm/s
This is a mount for 19mm cameras. Its still not completed NEW UPDATE: Added v2 where camera is moved a little bit forward Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution:…
XT60e m mount and antenna holder
Mark4 XT60 mount for any kind of mark4. For examle it can also on 13inch drone )) Filament: TPU 95A Note: XT60 needs to be cut from the side where the wires exit (I made a protrusion there so that I could then melt it with a soldering…
for drone frames 8inch Mark4 V2 (clone 367mm)
Legs I made while learning Onshape for Mark4 Aliexpress knockoff frame. Printed on X1C with PLA. Print flat side down.
Rear antenna mount for the GEPRC/Clone Mark4 5 inch quadcopter frame. Accommodates a SMA connector, 25mm GPS antenna/module, and RX antenna(s). There are two versions, one with a single RX antenna, and one for 2x diversity RX antennas.…
Mount for GPS, ELRS Antennas, XT60, VTX Antennas This 3D-printed mount is designed to securely hold both a GPS module and an ELRS antenna directly on the housing of a video transmitter with an XT60 connector. It offers a compact,…
A holder for the DJI o3 Air unit Atenna and a BN-220 GPS (probaly other GPS will fit)
Hi Folks, I found several GoPro mounts for Mark4 but actually none of them fit to my frame and screw spacing. I have ReadyToSky Mark4 225mm REA-Mark4 So I decided to make my own. I suggest printing with a hard TPU as I did.
The original design had a spacing of 38mm from the front to the screws in the back. That doesn't really match the frame I got and many others could have. Therefore my design has a spacing of 34mm - so be sure the screws are spaced that…
For files with prefix P (pink), 4 walls, 20% infill; prefix G (green), 6 walls, 25% infill; GG (green), 6 walls, 40% infill. Muzzle and MuzzleNut will require support while printing (Touching Buildplate), rest of the prints don't. Plunger…
Simple TPU mount. Print top facing side down to avoid overhangs and to get nice surface finish.
This is mark4 of the DIgital bird focus motor designed to work with any of the Digital Bird 3D printable Pan Tilt heads. Mark4 Takes away the need for Left and right hand parts. Both left/Right hand variants can now use exactly the same…
This is a high-durability, lightweight camera mount designed for the Foxeer Mini (22mm) series, tailored specifically for the Mark4 7-inch frame. This model uses a Direct-Bolt Pivot system . The camera angle is adjusted simply by…
Support… yes, sorry :) wall 3 infill 35-50% Filament - any kind of flex (tpu, elastan, etc.)
Hallo zusammen, heute ein Verbinder für den Unterarm und die Hand einer Ironman Mark42 Figur. Dient vllt als Inspiration für eigene Projekte, da es sehr speziell designed ist. Mit Hand und Unterarm parts in der richtigen Größe. Falls ihr…
Rear Antenna Holder VX RC and GPS Antenna BZ251
print both files or mirror one of them :) for guys like me who have not get the hd version or in need of replacement print from something stiff and use some sort of protection in front of it its just a mount not a guard .
Mount for BN880 Compass & GPS and RX for Mark4 V2 Layer Height: 0.15 Wall loops: 4 Infill: 35% Cross Hatch Support: Tree (manual)
Printed with 0.4 Nozzle with Geetech TPU 95A
Protects the lense and keeps the GFK camera plates safe. The cage presses against the frame to distribute the forces on impact. The "burst gfk" versions have more space around the top of the GFK plates (if you already had contact with the…
This model allows an M100 gps to be mounted to the back of a Mark 4 5-inch GEPRC frame with also an SMA antenna pigtail and the elrs antenna. It also leaves space for the battery cable to pop out. Printed in PLA with 15% infill split in…
Mark4 V2 10 inch sma crsf mount
Created camera holder for DJI O4 Air Unit (lite). I used spare silicon inserts (from Volador VX35 build) - you can print 2x bumpers as substitution (scale it accordingly in a slicer) and print it with soft material like TPU. I used 4x…
I have modified this mount to fit a 25x25 GPS (Foxeer M10Q-250) and a beefier ELRS antenna. Works for both 5" and 7" Mark4 frames. It uses a 20mm M3 screw with a nut to secure two halves together. Print using PETG or ABS.
A GoPro Session TPU Mount for the GEPRC Mark4 FPV Drone Frame, that can be screwed directly to the top plate of the mark4. Recommended to print it in TPU. I hope you like it! :)
This side cover is specifically designed to close the open gap between the top and bottom carbon plates of the GEPRC Mark4 7" frame. Unlike simple arm guards, this part shields the most vulnerable area of your drone – the electronics…
Fits 10 inch mark2.
It's a holder for a 13 mm diameter capacitor for the MK4 7-inch drone. Also, it holds cables.
Cover to protect FC while you flight in wet conditions. Its not ideal but does its work. printed with tree supports, PETG
FPV MARK4HD FRAME MOUNT for GPS Goku GM10 Mini V3
This is a remix of the original GPS mount, modified to include a beeper mount. Both GPS and beeper can now be securely attached in a single, compact setup. The beeper can be easily fixed using thin double-sided tape for a simple and…
Mark4 GPS (cyclone 181) upper mount for any kind of mark4. For examle it can also on 13inch drone ) Filament: TPU 95A
o4 pro antenna mount for geprc mark4 frame without gps mount cuz i dont have one print with tpu or flex pla for better crash resistance have fun & check my other models for the mark4 frame :)
FPV MARK4HD FRAME ANTENNA MOUNT DJI UNIT
FPV MARK4HD FRAME GOPRO MOUNT
Just another way of mounting a singe DJI O3 antenna on the back of Mark4 frame
Mark4 buzz mount for any kind of mark4 on 20mm width. model buzz20_b on one mount holes. For examle it can also on 13inch drone )) Filament: TPU 95A
This is a simple action cam mount for a cheap xiaomi mijia 4k action cam. It was designed for the geprc mark4 frame. The camera tilt is 30° Print Settings Printer: Alunar Filament: Geeetech TPU Designed completely in solvespace. Get the…
Be careful. To get the full mouth, just use the attached file and mirror it to the Z side in the slicer app.
Holder for hero10/9 for hd version of mark4. You can also use rubber band to secure gopro so it wont fall out if tolerances arent perfect. But i can use it without bands perfectly. Print with support. Category: Hobby
When pushing hard during freestyle maneuvers, hard landings, or full-throttle punch-outs, LiPo batteries often twist or slide laterally if held only by a standard strap. These TPU Battery Anti-Twist Side Guides snap directly onto your top…
Foxeer T-rex mini camera mount - there are two marks for set camera angle from 25 to 45 degrees printing without supports Buzzer holder for speedybee original buzzer - printing without supports MQ10 GPS mount (with port for foxeer…
These are the official CC BY-NC-SA 4.0 open-source STLs for the AeroTherm autonomous radiometric thermal UAV project by NasonNation Robotics. Mounting standard aerospace compute hardware to an FPV frame requires rigorous vibration…
This mount fits a GPS, 4.2mm antenna like the lollipops Flywoo ships with their DJI O4 Lite air units, and a T antenna for your preferred receiver. The post spacing is reduced to 20mm to fit my knockoff Mark4, compared to 25mm on the…
torsion bar for the mark4 v2 frame print it in PLA-CF or better in ABS-CF you will need 4 M3*4 insert
Mount for GPS, ELRS Antennas, XT60, VTX Antennas This 3D-printed mount is designed to securely hold both a GPS module and an ELRS antenna directly on the housing of a video transmitter with an XT60 connector. It offers a compact,…
This is a remix of the original GPS mount, modified to include a beeper mount. Both GPS and beeper can now be securely attached in a single, compact setup. The beeper can be easily fixed using thin double-sided tape for a simple and…
Simple TPU mount. Print top facing side down to avoid overhangs and to get nice surface finish.
First version was very lightweight, also easy to install. This version more strong and more crush ready. Also some different design v002 and v003 difference only arms holes, v003 much wider to fits more arms variations. This is an…
Cover to protect electronics from dust and wet. I can make designs for other models too. As i can see in this model difference only in arms length (5-10in) 🚨 Looking for a stronger version or have wider frame arms? Check out my updated…
![GEPRC Mark4 Clone Frame Parts [WIP]](https://media.printables.com/media/prints/98925/images/1000844_bc4bd012-487e-4951-9d7a-7ab5d18e3c8e/featured_preview_quad.jpg)
