Centauri Carbon Riser ventilated (two positions : open and closed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade for Elegoo Centauri Carbon, riser for the top glass.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Open Community License v1
And here's my version of the riser, i saw a similar one from @catstroyer but this one doesn't need glue, i hope it helps some of you guys.
Two positions : one to ventilate and one to fully close (Rises the glass 3cm in that position)
Easy to print, fast and no much filament. I think i used around 230g for 6h printing, depends of how much infill/walls you prefer to set, mine was 3 walls for 15% infill.
For info there is no tolerance for interlocking, if you print it well it fits perfectly and stays in place.
Leave a like if it helped :p