1 / 2
Centauri Carbon Riser ventilated (two positions : open and closed)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrade for Elegoo Centauri Carbon, riser for the top glass.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Open Community License v1
And here's my version of the riser, i saw a similar one from @catstroyer but this one doesn't need glue, i hope it helps some of you guys.
Two positions : one to ventilate and one to fully close (Rises the glass 3cm in that position)
Easy to print, fast and no much filament. I think i used around 230g for 6h printing, depends of how much infill/walls you prefer to set, mine was 3 walls for 15% infill.
For info there is no tolerance for interlocking, if you print it well it fits perfectly and stays in place.
Leave a like if it helped :p